(as of Nov 01,2020 16:12:55 UTC – Details)
TORRAS 2 in 1 car phone mount is our flagship series of the universal holder, built using only premium materials and the most suitable design style for most customers! Also, the car iPhone mount is universal, Due to the reusable suction cup, at home, you can stick it on the table or wall to study, video or listening. It also supports landscape view very well. Compatible with ranging from the 4.0-inch model of the smallest iPhone 5s to the 6.9-inch model of the latest Samsung Galaxy s20 ultra. BROAD COMPATIBLE: iPhone SE 2020/11/ 11 Pro/ Pro Max/ Xr/ Xs/ X/ Xs Max/ 7/ 7Plus/ 8/ 8Plus/6/6s/SE, Samsung Galaxy S20/S20+/S20 ultra 5G, note 20/20 ultra/10 /10 plus/S10/ a10e/ S10 Plus/ S9/ S9 Plus/S8/S7, Huawei, One Plus, LG, Nokia, Google Pixel 3a/3xl/ 4xl, Nexus and more.
2 in 1 Car Phone Mount
Simplicity for Life!
TORRAS: Simplicity for your travel Life, starting from TORRAS car phone holder!
2 IN 1 car phone mount is our flagship series of universal holder, built using only premium materials and the most suitable design style for 98% customers!
TORRAS Cell Phone Holder for Car Dashboard & Windshield & Air Vent Car Phone Mount
Important Structure Analysis
1. EASILY OPEN with ONE BUTTON: The car phone holder is easily touched to open, 0.1 second take your phone off!
2. ENHANCED SUCTION CUP: Many suctions only have one layer, but this one, two-layer reinforced (Silica gel+Dropped glue), more durable. Plus, there is an extra Sticky Pad.
3. SOFT RUBBER PROTECTOR: Freely tighten the clamp until it is firm to your satisfaction! Rubber pads protect your air vent blades from damage! Also, never can fall down.
4. ANY ANGLE YOU WANT: Although you don’t need 360° rotation, you can adjust its angle flexibly following your need at any time, to make you more focused when driving!
5. WARM TIPS: For one-time clamping tightly, you are better to press the car holder back edge of the arms (not the front edge).
WASH IT, THEN REUSE
Simply wash and dry naturally, then stick it to a new place, suction is as strong as before! At home, you can stick it on your desk or wall of the kitchen to assist you to study, cooking, video or listen to music/news.
2020 STRONGER SUCTION CUP
The upgraded suction cup can resist up to extreme weather: -20℃(-4°F)- 87℃(190°F), and bear 40 pounds easily! It is stronger 10 x than any other ordinary ones. Also, we add a sticky pad to make it stick more firmly!
LOCK YOUR PHONE FIRMLY
The cell phone holder is so TIGHT that your phone never falls off! It is perfect for the bump road, off-road or sharp turn.
You Can Also Use It at Home for…
You May Still Want to Know About This Car Phone Holder:
Q1: How sticky is this suction cup?
A1: This phone mount suction cup is one of the most sticky on the market. We add another layer of premium glue on the surface of the suction cup to enhance its viscosity. Temperature resistance: -4°F(-20 ° c) – 190 °F(87 ° c). It can be used even in the heat of Florida. If your holder does not stick, it is probably defective, you can apply for a replacement at any time, the original will not return back.
Q2: Does it need a large flat space to stick?
A2: No, this phone holder suction cup has a diameter of 2.56in /65mm, slightly larger than the width of a credit card.
Q3: Does it stick to the leather dash or texture?
A3: No, both these materials are not friendly to the suction cup.
Q4: Does this clip work with vertical blades of the air vent?
A4: Sure! The phone holder fits most standard air vents and both horizontal & vertical vent blades, but not for circular vents. Don’t worry about your car model, as long as the vent type meets.
Q5: Why use swivel clips instead of “I” and “II” gears?
A5: Because it would be suitable very well for whatever the thin or thick vent blades. This is the benefit of its flexible clip. You only need to rotate it simply to meet your needs. No worries about damaging the vent blades or the holder falling off.
Q6: Does the cell phone holder work with the latest phone Samsung galaxy s20, note 20/iPhone 12,12 pro,12 pro max, 12 mini?
A6: Of course, this cell phone holder is quite stable for all smartphones! But if you use an ultra 6.9-inch phone with a battery case, it can be difficult. However, 98% of customer needs can be easily met.
▶[EASY&REAL HANDS-FREE]: Release easily with one button, clamp fast with one hand! ▶The cell phone mount holder is suitable for all kinds of mobile phones with brand thick cases, Battery cases, and it is exceptionally sturdy to hold your phone tightly. Like iPhone SE 2020/11/ 11 Pro/11 Pro max /x/ xs max/xr/8 plus/8/7/6s plus, Samsung galaxy s20/s20+/s20 ultra 5G/note 20/10 plus/10/9 plus/9/s10/s9/a10e, Google Pixel 3a/4 XL, LG v20, One Plus and more.
▶[2 IN 1 ULTIMATE CAR MOUNT]: Are you not sure which installation method is better for your car? No worries! The 2in1 car phone holder can be flexible placement! Dashboard & Windshield & Air Vent & Home, all places work perfectly! Also, with low temperatures in winter and heat in summer, you can choose to avoid the issue caused by environmental influences.
▶[2020 ENHANCED VENT CLIP]: You can screw the nut to fix the clamp freely, the tighter you screw, the sturdier it will be! Its two small arms are just enough to press against the upper and lower vent blades to lighten the load on the middle one, no damage your car. This is more than 10 times sturdier than ordinary ones. It fits perfectly for your car no matter what the thicker blades vents or vertical ones.
▶[WHAT YOU GET]: With the car holder for cell phone, you can a package including 1 enhanced suction cup, 1 sticky pad, 1 strong air vent clip, 1 support card, and 1 user manual. You will enjoy our worry-free 36-month experience and 12-hour kindly customer response! Note: The sticky pad just can be used once, please think twice to stick it.